LAチョッパーのTバーとZバーハンドルP1110

11/4” KAGE FIGHTER T-BARS

LA CHOPPERSエルエーチョッパー

0601‑4445
• High-strength steel tubing
• Crossbar has over 35 degrees of rotation
to set your perfect angle
• 8 bolt billet aluminum clamp
• Straight heights available in 8”, 10”, 12”, 14” and 16”
• 11/4” Pullback heights available in 11”, 13” and 15”
• 31/2” on-center riser
• Designed for internal wiring
• Made in the U.S.A.
STRAIGHT HEIGHTS
CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # RISE END RISE WIDTH CENTER WIDTH PULLBACK
0601-4442 0601-4443 0601-4444 4” 8” 301/2” 3” 41/2”
0601-4445 0601-4446 0601-4447 6” 10” 301/2” 3” 41/2”
0601-4448 0601-4449 0601-4450 8” 12” 301/2” 3” 41/2”
0601-4451 0601-4452 0601-4453 10” 14” 301/2” 3” 41/2”
0601-4454 0601-4455 0601-4456 12” 16” 301/2” 3” 41/2”
STRAIGHT HEIGHTS
CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # RISE END RISE WIDTH CENTER WIDTH PULLBACK
0601-4457 0601-4458 0601-4459 8” 11” 301/2” 3” 41/2”
0601-4460 0601-4461 0601-4462 10” 13” 301/2” 3” 41/2”
0601-4463 0601-4464 0601-4465 12” 15” 301/2” 3” 41/2”

11/4” SUPER T HANDLEBAR
WITH BUILT-IN RISER

0601-2007
• Same great style as our original handlebars with
the added flavor of built-in 31/2” on-center risers
• Drilled and dimpled for internal wiring,
wire exit holes are in the risers
• Gloss black powder-coat finish
• Made in the U.S.A.
FOR 99-19 FLHT/ FLHX AND H-D FL TRIKES
PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601‑2007 Super T w/ built‑in risers 10” 33” 8”

11/4” MITER-T HANDLEBARS

• Made with high-strength
11/4” diameter steel tubing
• TIG-welded for strength; welds are
polished for a seamless appearance
• 31/2” on-center risers
• Drilled for internal wiring
• Accept stock controls
• Made in the U.S.A.

0601‑2318
0601‑2319
CHROME PART # GLOSS BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601-2317 0601-2318 10” Miter-T bar 281/4” 10” 23/8” 2”
0601-2319 0601-2320 12” Miter-T bar 281/4” 12” 23/8” 2”

11/4” CLUB HANDLEBARS

• Modeled after the ‘Frisco club scene, these
bars feature aggressive styling
• Drilled for internal wiring
• Notched for Throttle-By-Wire
• Triple chrome-plated or gloss black
powdercoat finish available
• 31/2” on-center riser area,
tapped for 1/2”-13 riser bolts
• Made in the U.S.A.

0601-4607
0601-4610
CHROME PART # GLOSS BLACK PART # DESCRIPTION END RISE WIDTH PULLBACK
0601-4607 0601-4608 Club mid 10” 281/2” 41/2”
0601-4609 0601-4610 Club high 13” 281/2” 41/2”

Require replacing the OEM handlebar control clamps halves with early-style versions: PART #s 0615-0273 or 0615-0274 (sold separately).

11/4” MOOSE KNUCKLE HANDLEBARS

• Features extra pullback for a more relaxed
riding position
• Measure 11/4” diameter in the clamping area;
will work with the OEM riser and clamp
• Notched for Throttle-By-Wire applications
• Drilled for internal wiring
• Bars include black control clamps to replace
the oversize OEM clamps
• Do not need to remove the stock pin in the
OEM mount clamps; bars still have more than
35 degrees of adjustment
• Knurled clamping area
• Will work with hydraulic clutches
• Made in the U.S.A.

0601-4602
0601-4604
0601-2658
• The baddest and original Outlaw Z-bar designs
• Accept handlebar risers and clamps for 1” diameter standard handlebar
• Drilled for internal wiring and notched for Throttle-By-Wire
• Made in the U.S.A.
NOTE: Not for use with stock handlebar clamp/ gauge mounts on 883C/ 1200C models.
CHROME PART # GLOSS BLACK PART # FLAT BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601-4602 0601-4603 0601-4604 Outlaw “Z” 23/4” 31” 51/8” 3”
0601-2658 Shorty H 3” 33” 11” 5”

11/4” ZIPPER HANDLEBARS

0601‑1211
• Hardcore throwback styling sets you apart
from the crowd
• Great for splitting lanes and zipping by
• Handlebar ends and center width section are
stepped down to 1” diameter to accept stock
controls and top clamp
• Notched for Throttle-By-Wire
• Made in the U.S.A.
NOTE: Not for use with stock handlebar clamp/
gauge mounts on 883C/ 1200C models.
PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601‑1211 Zipper bars 3” 29” 6” 5”

11/4” OLD SCHOOL HANDLEBARS

• Made with high-strength
11/4” diameter steel tubing
• TIG welded for strength; welds
polished for seamless appearance
• 1” clamping area
• Drilled for internal wiring
• PART #0601-2311 features laser-cut
web design that adds style and strength
• Made in the U.S.A.
NOTE: Not for use with stock risers and handlebar
clamp/ gauge mount on XL 883C/ 1200C models.

601‑2298
0601-2311
CHROME PART # GLOSS BLACK PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK
0601‑2296 6” Narrow Z 6” 27” 6” 3”
0601‑2298 8” Narrow Z 8” 27” 6” 3”
0601‑2299 0601‑2300 10” Narrow Z 10” 27” 6” 3”
0601‑2302 12” Narrow Z 12” 27” 6” 3”
0601‑2311 12” Web Z 12” 27” 6” 3”
NO IMAGE

あるじゃんbeyondとは?

あるじゃんビヨンドはハーレーのパーツカタログで得られる「見て」「探して」「発見して」といった喜びをパソコン,スマホ,タブレットなどの環境を問わずいつでも気軽に体験してもらいたいと思っています。
ワクワクしながらページをめくってみてください。きっと興味の沸くアイテムが見つかるはずです。

あるじゃんビヨンドサイトはハーレーパーツ「あるじゃん」が運営しております。
あるじゃんビヨンドの各パーツナンバーには通販サイトの商品ページへリンクされています。クリックするだけで気に入ったパーツの詳細を見たりご購入することができます。

CTR IMG